Page 1 of 1
gearbox sump pan parts (996 tiptronic C4)
Posted: Mon Jan 26, 2015 10:00 pm
by Rob996
Hi All,
My sump pan on the gearbox has heavy corrosion and the view of the OPC was when it came round to gearbox oil change I may need a sump pan as from looking at it they could not guarantee to would go back. Looking at it I can see where they are coming from as there is some rust evident and it appear to be flaking in places. So it is booked it to a local recommended mechanic to have a look, but want to find a cheaper alternative to the OPC part, either a new patent part or a second hand.
Can anybody recommend any suppliers/breakers?
thanks in advance
cheers
Rob
Re: gearbox sump pan parts (996 tiptronic C4)
Posted: Mon Jan 26, 2015 10:45 pm
by FarQue
Here's a few ideas:
Do you know how much a new one is? If not call Adam at Porsche Centre Bolton with your chassis nunber and find out how much they cost. Mention tipec and he'll do a reasonable price.
For a used one, Brian at Jasmine Porshalink is worth talking to, he may have one, as might Simon at 9apart or Douglas Valley (talk to Greame). All do mail order.
Re: gearbox sump pan parts (996 tiptronic C4)
Posted: Tue Jan 27, 2015 9:12 am
by tr7v8
A few points. To change the sump you have to drop the fluid in the box. I would only trust either a good auto gearbox specialist or an OPC to refill it correctly. It isn't a job for a general mechanic as it needs special tools. I'd also change the filter whilst it is off & also reset the gearbox ECU.
The gearbox is a ZF one so not specifically Porsche so it might be worth talking to a few gearbox specialists as well as they may be able to source a sump through the ZF channels.
PS On my Boxster a fluid change & the box reset made a huge difference to the change quality!
Re: gearbox sump pan parts (996 tiptronic C4)
Posted: Tue Jan 27, 2015 9:34 pm
by Rob996
tr7v8 wrote:The gearbox is a ZF one so not specifically Porsche so it might be worth talking to a few gearbox specialists as well as they may be able to source a sump through the ZF channels.
that is worth knowing as thus far not found any 996 specific,
Gearbox reset? does this mean OPC only?
Re: gearbox sump pan parts (996 tiptronic C4)
Posted: Wed Jan 28, 2015 8:26 pm
by Waylander
A96.00/30
986 321 025 02 Sump Pan Complete £237.86
Filter Set 996 307 403 00 £45.66
Gasket 986 397 016 00 £17.71
A96.10/35
722 270 161 2 sump £152.00,
Filter Set 722 277 009 5 £59.50,
Gasket 140 271 008 0 £18.12
Re: gearbox sump pan parts (996 tiptronic C4)
Posted: Wed Jan 28, 2015 10:00 pm
by Rob996
Spoke to my local OPC today to get a price (with a TIPEC discount) the sump was around £225, with new sump and Gearbox service the total was £561.32 ouch!
Doing a bit of searching the web and it looks like the box is a ZF 5hp19hla so not sure, any gearbox experts out there who know if the variants (i.e. HLA etx) all share the same sump pan?
Re: gearbox sump pan parts (996 tiptronic C4)
Posted: Wed Jan 28, 2015 10:07 pm
by tr7v8
Rob996 wrote:tr7v8 wrote:The gearbox is a ZF one so not specifically Porsche so it might be worth talking to a few gearbox specialists as well as they may be able to source a sump through the ZF channels.
that is worth knowing as thus far not found any 996 specific,
Gearbox reset? does this mean OPC only?
Rob. anyone with a PWIS can do it. Possibly disconnecting the battery will do it. It resets the DME.