These are actually front 993C4 calipers which are identical to M030 except the crossover pipe is at the top - easy enough to change over.
No plate lift, bleed screws are free and are in the original 993C4 silver finish.
Looking for £295 inc delivery.
Rich
993C4 / 944T S2 968 M030 calipers
Moderator: Moderators
-
Richy_S
- Posts: 721
- Joined: Thu Nov 15, 2007 6:44 pm
- TIPEC membership: 4288
- Location: Towcester, Northants
993C4 / 944T S2 968 M030 calipers
Last edited by Richy_S on Sat Jan 29, 2011 5:07 pm, edited 1 time in total.
-
sam
- Posts: 4904
- Joined: Mon Nov 12, 2007 12:16 am
- TIPEC membership: 993
- Location: Emsworth Hants
Re: 993C4 / 944T S2 968 M030 calipers
pics please, and how long ago were they in use?
-
Richy_S
- Posts: 721
- Joined: Thu Nov 15, 2007 6:44 pm
- TIPEC membership: 4288
- Location: Towcester, Northants
Re: 993C4 / 944T S2 968 M030 calipers
Blimey that was quick.
They haven't been used for sometime.
Have connected an airline and the pistons blow out fine. I can get some new seals at a low cost if requested bit I would think they are OK.
Pics to follow.
Rich
They haven't been used for sometime.
Have connected an airline and the pistons blow out fine. I can get some new seals at a low cost if requested bit I would think they are OK.
Pics to follow.
Rich
-
sam
- Posts: 4904
- Joined: Mon Nov 12, 2007 12:16 am
- TIPEC membership: 993
- Location: Emsworth Hants
Re: 993C4 / 944T S2 968 M030 calipers
Cheers Rich, dont really need them, but good for 'stock' 
-
964russ
- Posts: 404
- Joined: Tue Jan 29, 2008 6:29 pm
- TIPEC membership: 4754
- Location: Cheshire
-
Richy_S
- Posts: 721
- Joined: Thu Nov 15, 2007 6:44 pm
- TIPEC membership: 4288
- Location: Towcester, Northants
Re: 993C4 / 944T S2 968 M030 calipers
Sold - thanks Russ