Hi all,
Can anyone advise where I can get a used or new supercharger kit for a 964/993 .
Any advise please.
Frank
964 Supercharger
Moderator: Moderators
-
964russ
- Posts: 404
- Joined: Tue Jan 29, 2008 6:29 pm
- TIPEC membership: 4754
- Location: Cheshire
Re: 964 Supercharger
U.S.A
-
Sunnysidebb
- Posts: 26
- Joined: Sun Sep 05, 2010 2:01 pm
- TIPEC membership: 0
Re: 964 Supercharger
<<<<<<<<<<<<<<UPDATE>>>>>>>>>>>>>
I have spoken with Tom from TPC . I spoke for over an hour about the Supercharger Kit.
I like what he has told me. Some even better news is I might very well be able to run a Water/Air IC. TPC is relatively small but he recons if I can find space I would be better of not using his and having a custom one fabricated for more cooling.
Also further forward on an ECU
I have bee looking into a Motec system, with sequential injectors, individual coil packs, diagnostic lap top program and various outputs to devices .
I am on the look out for a 70mm or 80 mm Throttle body. He recons the standard one is a limitation to power output. Having no cats,a sports exhaust, 80mm throttle body , a MAP sensor and not an air flow sensor, with Motec ecu and 6psi boost and good IC should yield 340 whp. Thats 400 crank (he recons about 20% transmission etc losses)
Any ideas where I could get a 70 mm or 80 mm TB ????????
Frank
__________________
I have spoken with Tom from TPC . I spoke for over an hour about the Supercharger Kit.
I like what he has told me. Some even better news is I might very well be able to run a Water/Air IC. TPC is relatively small but he recons if I can find space I would be better of not using his and having a custom one fabricated for more cooling.
Also further forward on an ECU
I have bee looking into a Motec system, with sequential injectors, individual coil packs, diagnostic lap top program and various outputs to devices .
I am on the look out for a 70mm or 80 mm Throttle body. He recons the standard one is a limitation to power output. Having no cats,a sports exhaust, 80mm throttle body , a MAP sensor and not an air flow sensor, with Motec ecu and 6psi boost and good IC should yield 340 whp. Thats 400 crank (he recons about 20% transmission etc losses)
Any ideas where I could get a 70 mm or 80 mm TB ????????
Frank
__________________
-
Pete917
- Posts: 282
- Joined: Sun Dec 07, 2008 12:04 pm
- TIPEC membership: 0
- Contact:
Re: 964 Supercharger
You could try Jenvey
-
Sunnysidebb
- Posts: 26
- Joined: Sun Sep 05, 2010 2:01 pm
- TIPEC membership: 0
Re: 964 Supercharger
Thanks Pete,Pete917 wrote:You could try Jenvey
Your spot on with Jenvey, they can supply just about any TB I need.
Cheers,
Frank
-
Pete917
- Posts: 282
- Joined: Sun Dec 07, 2008 12:04 pm
- TIPEC membership: 0
- Contact:
Re: 964 Supercharger
Your welcome. I have a set of Jenvey ITB's. They work a treat!