1976 911SC Targa Engine Removal

911, 964 and 993 discussion area

Moderator: Moderators

Post Reply
CJG944
Posts: 22
Joined: Tue May 27, 2014 6:43 pm
TIPEC membership: 0

1976 911SC Targa Engine Removal

Post by CJG944 »

Just a quick question, is it recommended to remove the engine with the transmission or split them prior to dropping the engine? Thanks in advance.
sjwright944
Posts: 17
Joined: Sun Sep 01, 2013 8:55 pm
TIPEC membership: 6880

Re: 1976 911SC Targa Engine Removal

Post by sjwright944 »

I've only ever removed the engine and transmission once so not an expert, but when I put it back in I intend to keep them together and would certainly remove them together next time.
When removing I ended up with the engine tilted at an angle to the gearbox but still slightly attached so now I'm worried I may have bent the shaft.
CJG944
Posts: 22
Joined: Tue May 27, 2014 6:43 pm
TIPEC membership: 0

Re: 1976 911SC Targa Engine Removal

Post by CJG944 »

It's unlikely that you have bent the input shaft as they are pretty thick. I have taken the engine out and left the transmission but it all happened a bit quick on final release. I will put back as a whole I think. You live and learn.
Freeman
Posts: 2
Joined: Mon May 01, 2017 7:44 pm
TIPEC membership: 0

Re: 1976 911SC Targa Engine Removal

Post by Freeman »

I have taken the engine out twice on its own without any issues.
I don't see much point taking the gearbox unless you need too.
Post Reply