Porsche Enthusiasts Club Forum

Hello

Anyone have a 944 washer jet (89 model -- but think they are the same..?) - my o/s is OK - but n/s keeps getting blocked and mot soon!

Thanks
Ian

You could try removing the none return tee piece in the tubing and piping it either with a smaller piece of tubing or a standard (pennies to buy) none return one, you don't have water immediately at the nozzle but hardly noticeable and I found the water comes out of the nozzle better and doesn't block as easily. Di mine while waiting for a replacement non return part and have never fitted it as it still works fine as is.

New ones from an OPC are about £16 or so, all 944 are the same & only heated ones are available these days.
Mine kept blocking & an air line cleared the jet. The root cause of mine was a reservoir full of some blackish crap, which blocked everything but most importantly the one way valve, which had set like cement! I but a generic one from Halfrauds fixed it.

http://cgi.ebay.co.uk/Porsche-944-heate ... 19c633d423


seems like a bargain