Wanted 944 front end parts or whole car for parts

[ryan 944]

Hi all,

I am looking for front end parts for my 1984 black 944, or a whole car for parts. as my car has a s2 front end at the minute and think I am going to put it back to s1.
Let me know if you can help

Thanks Ryan

[t3rra]

You will require

Front wings, if current bumper is genuine s2/turbo

Badge pannle
Head light covers + plastic fronts 2 lights ( MIT have in red )
Bumper and valance ( Iv got in red with fogs )
Lights.
Bumper mounts, one toe and one crush type ( think Iv got )

Possable wiring as the n/a plugs for lights are differnt 2 turbo/s2 think Iv got these some where as I did the swap other way. N/a turbo.

Possable under tray.

U will be left with front bumper carrier and under tray 2 bumper if there.

[Althejazzman]

Interesting. I don't think I've ever seen anyone put it back to the early front end, but I do know that people have problems making the S2 panels fit. Is this why you're putting it back?

[ryan 944]

Interesting. I don't think I've ever seen anyone put it back to the early front end, but I do know that people have problems making the S2 panels fit. Is this why you're putting it back?

The s2 wings have some rust at the bottom, and I fancey a retro look might change the wheels to some retro deep disc as well, I put the s2 front end on a few years back changing the wings, badge panel, bumper, bumper mounts etc etc I had all the s1 part but my brother has one aswell and he ended up using a lot of my parts as were he went to have it resprayed the front corner was damaged and filled.

[ryan 944]

You will require

Front wings, if current bumper is genuine s2/turbo

Badge pannle
Head light covers + plastic fronts 2 lights ( MIT have in red )
Bumper and valance ( Iv got in red with fogs )
Lights.
Bumper mounts, one toe and one crush type ( think Iv got )

Possable wiring as the n/a plugs for lights are differnt 2 turbo/s2 think Iv got these some where as I did the swap other way. N/a turbo.

The front end is s2, wings etc etc, where are you and what sort of money would you be looking for?

Thanks Ryan

Possable under tray.

U will be left with front bumper carrier and under tray 2 bumper if there.

[t3rra]

MIT be worth, getting the wings repired, and made 2 fit n/a set up
Rather then new wings and paint, should be a lot easyer 2 line everything up and fit if the wings are on from factory.

Got new wings on my current turbo and they need bending or twisting 2 get the lines perfect.

[ryan 944]

MIT be worth, getting the wings repired, and made 2 fit n/a set up
Rather then new wings and paint, should be a lot easyer 2 line everything up and fit if the wings are on from factory.

Got new wings on my current turbo and they need bending or twisting 2 get the lines perfect.

The wings are s2 so will not fit with the early bumper

[t3rra]

The differnce is a small triangle shape where the wing meets bumper, about 6mm by 3mm not much. I cut my n/a wing 2 turbo shape when I did mine.